The high-efficiency vacuum cleaner adopts the principle of negative pressure pure suction, and is composed of a dust collection system, a primary dust collection box, a secondary dust collection box, a dust recovery system, a hydraulic system, an electronic control system, and a travel system. It has the advantages of a wide dust collection range, a high suction rate, no secondary dust at the suction port, no dust emission at the air outlet, and high work efficiency. It is the preferred product for sanitation cleaning and material recovery.
It is suitable for enterprises with high dust, high concentration and high density working conditions that are prone to dust pollution, rapid cleaning and maintenance of urban elevated roads, expressways and bridges and tunnels, and cleaning and maintenance of urban main roads, high-grade highways and expressways.

Product Parameters

Overall dimensions: length × width × height (mm): 7365 * 2480 * 3000
Chassis model: EQ1185LJ9CDE
Main engine power / speed: 147KW / 2500 rpm
Emission standard: GB3847-2005, GB17691-2018 National VI
Rated power / speed: 97KW / 2300 rpm
Auxiliary engine emission standard: National III EFI
Fuel type: diesel
Fuel tank capacity: 130L
Auxiliary engine drive mode: belt transmission power
Gear: 9
Number of tires (pieces): 6
Tire specifications: 275/80R22.5 18PR
Tray front/rear: 1862/1806
Wheelbase (MM): 3950
Number of front and rear leaf springs: 8/10+7
Rear tipping mechanism: double hydraulic top lift
Trash bin material: Q235B/3.0MM
Trash bin volume: 12m³
Cleaning rate: 99.8%
Suction cup working width mm : 3000
Side brush performance: dust cover dust-free cleaning side brush
Suction particle size (equivalent diameter): 120mm
Garbage inlet connection diameter: 250mm
Cleaning operation speed: 3-25km/h
Control method: intelligent electric control/manual control
Operation capacity: 13000--120000㎡/h
Maximum driving speed: 100㎞/h
Fan wind pressure and air volume: 9800pa/28000
Filtering method: Japan Toray filter element
Number of filter cartridges: 12
Dust treatment method: high-pressure gas backwash
Unloading method: rear hydraulic box automatic lifting
Filter accuracy: PM2.5
Dust particle absorption rate: 99.8%
Operation fuel consumption: 18L/h
Noise near the driver's ear (db(A)): <63
Cab equipment: cold and warm air conditioning tripod fire extinguisher
Indicator light: night lighting, rear LED double arrow indicator light
Image: night lighting, rear camera

1. The brush material inside the suction cup is wear-resistant stainless steel brush wire, which has super cleaning ability and long service life. It is replaced every 550-900 hours according to the working conditions. The connection between the cleaning motor and the roller brush adopts a chain, which can be adjusted without slipping.
2. There are 2 side brushes, which are wear-resistant wire brushes. The cleaning width is 3500mm when used. The side brushes are arranged at the rear end of the rear axle and the rear end of the vehicle, close to the suction cup device, which is convenient for absorbing the floating dust. The side brushes are equipped with dust covers, which can clean dust-free during operation.

Product Features

1. Environmental protection of the equipment: The equipment adopts industrial dust collection and filtering methods, with higher and more thorough filtering accuracy and more up-to-standard emissions (up to PM2.5) to ensure the cleanliness of the discharged air; high filtering accuracy and automatic back-blowing and dust cleaning filtering system ensure the air permeability of the filter element, which greatly reduces the cost of use.
2. Long life of the fan: The fan is located at the very end of the entire vacuum truck. The filtered air enters the fan. The fan has no wear and tear and can be used for life without maintenance.
3. Low cost of use: low fuel consumption, the average economic fuel consumption under working conditions is not higher than 12.5L/h;
4. Powerful functions: equipped with a super dust suction system, which can cope with various types of cleaning tasks, and can quickly and thoroughly remove large particles, heavy dust, garbage, leaves and other dry debris on the ground;
5. Filter element cleaning method: high-pressure back-blowing cleaning method is adopted, and the filter element is back-blown every 13 seconds for thorough cleaning;
6. Separation of garbage bin and filter bin: large particles are separated from dust, and gravity dust reduction is used for filtration, and the filter screen intercepts to make the filtration system more stable and continuous;
7. Hydraulic control system: adopts first-line well-known control valves, and the oil pump motors are all domestic famous brands to ensure high performance and high reliability of the equipment;