The vacuum cleaner truck adopts fuel-saving and lightweight design, with a 12-ton chassis, a 125kw (170 horsepower) engine, and an international brand Fast low-speed gearbox, which saves 5%-10% fuel than similar products. The vehicle has few faults and good quality. The riveted ultra-wide beam has super strong load-bearing and low maintenance costs. The 3800MM wheelbase is suitable for turning around in the factory. The 7100MM length of the whole vehicle makes the whole vehicle light and reduces the inflexibility and heavyness of the large vehicle in closed construction sites. The low construction efficiency caused by the inflexibility and bulkiness; the cab adopts a new concept design and uses special cold-rolled steel plates with strong impact resistance. It is standardly equipped with LED night driving lights to make driving safer. It is also standardly equipped with a multi-function steering wheel and cruise control function.

Product Parameters

Overall dimensions: length × width × height (mm) 7100*2300*2690
Chassis model: EQ1125J8CDC
Main engine model: D30TCIFI
Main engine power/speed: 125KW/2800 rpm
Emission standard: GB3847-2005GB17691-2018 National VI
Rated power/speed: 97KW/2300 rpm
Auxiliary engine emission standard: National III EFI
Fuel type: diesel
Fuel tank capacity: 130L
Auxiliary engine drive mode: belt transmission power
Gear: 9
Number of tires (pieces): 6
Tire specifications: 8.25R20/6
Wheelbase front/rear: 1745/1630
Wheelbase (MM): 3800
Number of front and rear leaf springs: 8/10+7
Rear tipping mechanism: double hydraulic top lifting
Garbage bin material: Q235B/3.0MM
Garbage bin volume: 8m³
Cleaning operation rate: 99.8%
Suction cup working width mm : 3000
Side brush performance: dust cover dust-free cleaning side brush
Suction particle size (equivalent diameter): 120mm
Garbage inlet connection diameter: 250mm
Cleaning operation speed: 3-25km/h
Control method: intelligent electric control/manual control
Operation capacity: 8500-90000㎡/h
Maximum driving speed: 100㎞/h
Fan wind pressure: 9800pa
Filter method: Japan Toray filter element
Number of filter cartridges: 10
Dust treatment method: high-pressure gas backflush
Unloading method: rear hydraulic box automatic lifting
Filter accuracy: PM2.5
Dust particle suction rate: 99.8%
Operation fuel consumption: 13L/h
Noise around the driver's ear (db(A)): <62
Cab equipment: cold and warm air conditioning tripod fire extinguisher
Indicator light: night lighting, rear LED double arrow indicator light
Image: night lighting, rear camera

1. The brush material inside the suction cup is wear-resistant stainless steel brush wire, which has super cleaning ability and long service life. It is replaced every 550-900 hours according to the working conditions. The connection between the cleaning motor and the roller brush adopts a chain, which can be adjusted without slipping.
2. There are 2 side brushes, which are wear-resistant wire brushes. The cleaning width is 3000mm when used. The side brushes are arranged at the rear end of the rear axle and the rear end of the vehicle, close to the suction cup device, which is convenient for absorbing the floating dust. The side brushes are equipped with dust covers, which can clean dust-free during operation.

Product Features

1. Environmental protection of the equipment: The equipment adopts industrial dust collection and filtering methods, with higher and more thorough filtering accuracy and more up-to-standard emissions (up to PM2.5) to ensure the cleanliness of the discharged air; high filtering accuracy and automatic back-blowing and dust cleaning filtering system ensure the air permeability of the filter element, which greatly reduces the cost of use.
2. Long life of the fan: The fan is located at the very end of the entire vacuum truck. The filtered air enters the fan. The fan has no wear and tear and can be used for life without maintenance;
3. Low cost of use: Low fuel consumption, the average economic fuel consumption under working conditions is not higher than 12.5L/h;
4. Powerful functions: Equipped with a super dust suction system, it can cope with various types of cleaning tasks, and can quickly and thoroughly remove large particles, heavy dust, garbage, leaves and other dry debris on the ground;
5. Filter element cleaning method: High-pressure back-blowing cleaning method is adopted, and the filter element is back-blown every 13 seconds for thorough cleaning;
6. Separation of garbage bin and filter bin: Large particles are separated from dust, and gravity dust reduction is used for filtration, and the filter screen intercepts to make the filtration system more stable and continuous;
7. Hydraulic control system: It adopts first-line well-known control valves, and the oil pump motors are all domestic famous brands to ensure high performance and high reliability of the equipment;