1. Overview of the side curtain car body structure
The double side walls of the side curtain car body are full-length curtains, which can be fully opened during loading and unloading. During operation, the side curtains are tightened by the hooks at the lower end of the curtains through the tensioners of the front/rear corner posts. The side curtain car body can be divided into two structures: without middle wall and with middle wall. The side curtain car body without middle wall is equipped with sliding columns and side fences (cargo cross bars); the inner wall of the side curtain car body with middle wall is equipped with flexible medium.
2. Maintenance of the curtain
(1) The curtain is specially used for imported vehicles and should be kept away from fire and highly corrosive solutions.
(2) There are longitudinal and transverse reinforcement ribs and anti-wear strips on the inner surface of the side curtain. If the reinforcement ribs or anti-wear strips are damaged, they should be replaced in time to avoid damage to the curtain.
(3) There are rolling tubes at both ends of the curtain, which work together with the tensioning devices of the front and rear corner posts to tighten the side curtains to an appropriate degree of tension. Generally, the rolling tube can be rotated 90 degrees and fixed when tensioning.
(4) After using the side curtain tensioner, its handle should be fixed to prevent the side curtain from loosening or scratching.
(5) If the curtain is damaged but not repaired in time, the customer shall be responsible for the loss.
3. Maintenance of flexible media
(1) During loading and unloading, be careful not to tear or scratch the flexible media. If the above situation occurs, it should be repaired in time to prevent the damage from expanding.
(2) Check whether the flexible media pressure strip is loose. If it is loose, it should be repaired as soon as possible to avoid the pressure strip damaging the goods.
(3) The flexible media is glued to the steel plate with strong glue. If it is debonded, it should be repaired in time.
(4) If the flexible media is contaminated by liquids such as sewage, strong acid, strong alkali, etc., it should be cleaned and dried in time before use.
4. Maintenance of sliding columns and side fences (cargo cross bars)
(1) When moving the sliding column, keep the sliding column tilted outward by about 5 degrees. If necessary, add a small amount of lubricating oil to the sliding column roller. The sliding column is a special key component. If it is damaged, contact Shenzhen CIMC Special Vehicle Co., Ltd. or go to the designated factory for repair.
(2) When moving the sliding column, do not push hard in the direction of the track to prevent the sliding column from falling off the track.
(3) When moving to the required position, fix the sliding column to prevent damage to the side curtain during operation.
(4) The side fence (cargo cross bar) should be fixed on the cross bar interface to prevent it from falling off during transportation.
5. Maintenance of aluminum alloy stretched parts:
Aluminum guide rails are special components, manufactured by professional manufacturers using professional molds. If damage affects the operation of the side curtains and sliding columns, contact the company or go to the designated manufacturer for repair.
6. Maintenance of floors and door panels:
The maintenance of floors and door panels is the same as that of aluminum riveted compartments.